Pantech G700 - Manual (Page 22)

CALL LOGS CALL LOGS
43
CALL LOGS CALL LOGS
42
Last call
This displays the cost of the last call.
Last call
This displays the time lapse of the latest call.
All calls
This displays the total lapsed time of all calls.
Reset call time
This initializes the call time of Last call or All call.
All calls
This displays the total cost of all calls.
You can delete this by using PIN2 authorization.
Clear logs
This is a function of deleting logs related to the cost of calls by inputting
PIN2.
Cost units
This is a function of setting a standard call within the service zone.
You can select the two options as follows.
- Read units : This reads Cost unit.
- Set units : You can set current cost unit and price per unit.
Max cost
You can set the maximum value of call costs in specified units through
PIN 2 authorization. They have two options as follows.
- Read limit : This reads the maximum units.
- Set limit : This sets the maximum units.
This is a function to read the information on call times.
Call timers