Pantech G700 - Manual (Page 7)

13
INTERNAL LCD INTERNAL LCD
The LCD is divided into two parts of screen. One screen lines up a group of icons
showing the status of the unit, while the other screen shows messages, telephone
numbers, icons, etc
When a particular function is activated or a message is received, each
applicatble icon is shown.
The icons above show all icons which can be displayed.
Below is the explanation of each icon.
12
Signal Power
GPRS
Line is busy
Melody
Vibration
Vibration+Melody
Etiquette Mode
SMS Message
Maximum SMS
Message
This icon indicates the level of RF signal.
The number of bars is different according to the
power of the signal received.
This icon indicates the availability of GPRS
service.
This icon indicates that the line is busy.
This icon indicates that the ringer is in melody
mode after vibration mode.
This icon indicates there are unread messages.
This icon blinks when the messages saved in the
SIM are full.
Indicates manner mode. No sound is produced
in this mode. To change to Etiquette Mode,
press and hold *
This icon indicates that the ringer is in melody
mode.
This icon indicates that the ringer is in vibration
mode or manner mode (vibration mode: blue
color, manner mode: red color).This icon
indicates that the ringer is in vibration mode or
manner mode (vibration mode: blue color,
manner mode: red color).
INTERNAL LCD INTERNAL LCD
Voice Mail Message
Alarm
This icon indicates there are unchecked voice
mails.
This icon indicates that the alarm is set
Roaming
This icon indicates that the roaming system is
supported.
Battery
Headset
Handset Lock
Divert Call
Secure Connection
WAP Push Message
GPRS
This indicates the level of the battery.
This indicates headset connection.
This indicates activation of ‘divert call’ function.
Indicates that the WAP connection is made via
Secure Connection.
Indicates that a WAP Push message has been
received.
Indicates that the GPRS service is in use.
Indicates the handset is locked. To lock the
phone, press and hold #.