PYLE Audio PLR7N - Manual (Page 19)

1. Each time the MENU button is pressed on CDC mode, the menu on the screen changes
as follows.
CD CHANGER -> VOLUME -> USER SELECTOR -> PICTURE -> OSD OFF
17
CD CHANGER CONTROL
When a CD (VCD) changer is connected to this unit with 8 pin DIN cable, AV3 mode
changes to CDC mode and CDC control menu is displayed on the screen.
1. Press the MODE button to select CD CHANGER (AV3) mode.
Each time you press this button, the display changes as follows.
RADIO-> AV1-> AV2-> AV3 (CD or VCD CHANGER) -> AV4(TV)
2. When CD CHANGER (AV3) mode is selected, The monitor shows following picture.
3. Press the SEARCH UP/DOWN button to select the item.
4. Press the CH UP/DOWN button to adjust the level of the selected item. You can also
adjust the level upward by pushing the BAND button on the unit.
CD STATUS
This shows the current CD status (DISC CHECK, SEEK, PLAY, ETC)
PLAY TIME
This shows playing time of the disc being played.
NOTE
2. The CD (VCD) changer must be connected to the 8pin DIN socket on the rear of the
unit with the 8pin DIN cable in our CD/VCD changer gift box.
3. The video output of VCD changer must be connected to AV3 video input.
DISK NUMBER
1. Press the SEARCH UP/DOWN button to select DISC NUMBER.
2. Each time you press the CH UP button, the disc in the CD changer
will be selected forward and the displayed disc number increases by one.
3. Each time you press the CH DOWN button, the disc in the CD changer
will be selected backward and the displayed disc number decreases by one.