Pyramid Car Audio PB 610 SX - Manual (Page 2)

-1-
Thank you for purchasing a Pyramid car audio amplifier.
Rest assured you have purchased a quality product designed and engi-
neered to give you many years of uncompromised musical service.
This amplifier has been designed using the latest in electronic technol-
ogy available today and will provide you with years and years of high quality
sound level amplification and reproduction.
This amplifier have been designed with a fully regulated 100% MOSFET
Power supplies assuring extremely quick switching response and self pro-
tection with soft starting power turn on.
A FEW WORDS ABOUT PROTECTION CIRCUITRY.
Advanced protection circuits have been designed into all Pyramid
amplifiers. The protection circuitry will disable the amplifier if it senses an
input overload, speaker short circuit short or extreme high temperature
conditions.
When the protection circuit is in operation the LED indicator on the unit
will light indicating that the amplifier has gone into a self preservation mode.
At this time please check your system to see what is causing the protec-
tion circuit to fire. The amplifier can be reset by turning the remote power off
and then on again. If the system shuts down because of a thermal over-
load condition, allow the amplifier to cool down before restarting. If the
amplifier shutdown because of an input overload or speaker short circuit
please be sure to correct these conditions before restarting the amplifier.
INTRODUCTION
PYRAMID SERIES