Pyramid Car Audio PB 610 SX - Manual (Page 6)

-5-
FEATURES
PYRAMID SERIES
PB 800 SX
•
FOUR CHANNEL BRIDGEABLE AMPLIFIER
•
300 WATTS X 4 OUTPUT OR
•
600 WATTS X 2 BRIDGED OR
•
300 WATTS X 2 + 1 X 600 W
•
VARIABLE GAIN CONTROL
•
REMOTE TURN ON/OFF
•
2 OHM STEREO STABLE
•
TWIN MOSFET PULSE WIDTH MODULATED POWER SUPPLIES
•
VARIABLE BASS BOOST ( 0-18 dB @ 60HZ)
•
VARIABLE TREBLE BOOST (0-12 dB @ 10KHZ)
•
GOLD PLATED RCA HIGH IMPEDANCE INPUTS
•
SPEAKER TERMINAL BARRIER STRIP
•
SOFT TURN-ON CIRCUIT
•
HEAVY DUTY ALUMINUM ALLOY HEAT SINK
•
DC TO DC CONVERTER CIRCUITRY
•
POWER ON & DIAGNOSTIC LED INDICATOR
•
SIGNAL TO NOISE RATIO: GREATER THAN 90dB
•
DISTORTION: LESS THAN 0.05% @RMS POWER
•
FREQUENCY RESPONSE : 10HZ-30KHZ
•
INPUT SENSITIVITY: 100MV-1V ADJUSTABLE
•
INPUT IMPEDANCE: 10K OHMS
•
OVERLOAD PROTECTION / SHORT CIRCUIT PROTECTION
•
THERMAL SHUTDOWN
•
REMOTE BASS BOOST
•
DIMENSIONS: 380MM(L) X 242MM(W) X 64MM(H)