Panamax MAX 5300 - Manual (Page 6)

4 150 Mitchell Blvd., San Rafael, CA 94903 • www.panamax.com
FEATURE OVERVIEW
Switched Outlets Pushbutton:
1 of 2 Triggers that can activate a
turn-on or shutdown sequence for
Outlet Bank 2 and High-Current outlets. LED Indicators:
Status indicator lights
for Switched Outlets,
DC Voltage Trigger,
Ground OK,
Line Fault
and Unsafe Voltage Meter Light Dimmer:
Controls brightness
of the Voltmeter
backlighting.
High Current Outlet Bank:
Two delayed outlets designed for
high-current components such as
amplifiers and powered subwoofers.
The current available to connected
equipment is not limited by the
noise filtration components.
Voltage Sense
Trigger Input:
1/8 inch Mini-Plug jack.
Connect to a remote trigger
device that provides 12VDC to
trigger a startup/shutdown
sequence. This is the second
trigger that will activate the
MAX
® 5300 turn-on or shut -
down sequence. (See switched
outlets pushbutton on front
panel).
Voltage Sense
Trigger Output:
1/8 inch Mini-Plug jack.
Connecting a 12VDC trig-
ger to the Voltage Sense
Circuit will allow the same
signal to pass through the
Voltage Sense Output to
control the startup/shut-
down of an additional
device. High Current
Outlets Turn-On
Switch:
3-position slide switch.
Allows adjustment of
the Turn-On delay for
the two High-Current
Outlets. Choose
between 0, 10 and 30
seconds. Outlet Bank 2 Turn-
Off Switch:
3-position slide switch.
Allows adjustment of the
Turn-Off delay for Outlet
Bank 2. Choose
between Always-On,
10 and 30 seconds.
Satellite Coax Jacks:
Two pairs of gold plated
F-Connectors optimized
for Satellite TV signal
line protection. Cable TV Coax Jacks:
Two pairs of gold plated
F-Connectors optimized for
Cable TV and non-ampli-
fied Rooftop Antenna signal
line protection.
Telephone Jacks:
In/Out connections
for telephone line or
pay-per-view line
protection.
Voltmeter:
Backlit analog meter
measures incoming
voltage source from
0-150 VAC. Convenience Outlet:
Provides a quick convenient
way to plug in components
such as camcorders and
video game systems.
IEC Main Power
Receptacle:
Detachable power
cord connects to
this receptacle.
15A Circuit Breaker:
Opens in the event that
equipment plugged into
the MAX
® 5300 draws too
much current. When the
white button of the breaker
is visible, the breaker has
opened. Reduce the load
and push to reset.
Ground Lug:
Provides a
common
grounding point
for equipment
with separate
ground leads.
Filtered Outlet Bank 1:
Four Always-On, Balanced
Double L filtered outlets for
audio/video components that
require constant power to
maintain programmed settings. Filtered Outlet Bank 2:
Four switched, Balanced
Double L filtered outlets for
audio/video components that
do not require constant power.