Pioneer SUPER TUNER IIID AVIC-X9310BT - Manual (Page 127)

When connecting iPod with the Aha Radio in-
stalled, you can control, view, and/or hear Aha
Radio content from this navigation system.
You can also display POI information from the
Aha Radio application on the map screen and
route to these POIs.
p For details concerning operations, refer to
the Help and Tips section within the Aha
Radio application.
p Aha Radio stations may require initial
setup or sign-in before the station can be
accessed.
p Be sure to read Using App-based Connected
Contents before you perform this opera-
tion.
= For details, refer to Using App-based
Connected Contents on page 217.
Note:
! Certain functionality of the Aha Radio service
may not be available when accessing the ser-
vice through the Pioneer navigation system,
including, but not limited to, creating new
Aha stations, deleting Aha stations, recording
‘shouts’ by voice, adjusting Aha Radio App
settings, logging into Facebook, creating a Fa-
cebook account, logging into Twitter, or creat-
ing a Twitter account.
! Aha Radio is a service not affiliated with
Pioneer. More information is available at
http://www.ahamobile.com.
! A specific version of the Aha Radio applica-
tion is required to be installed on your iPhone
in order to enjoy Aha Radio content on this na-
vigation system.
Because the application for the iPhone is not
provided by Pioneer, the required version of
the application may not yet be available at the
time of purchase of the navigation system.
Availability, version and update information
can be found at
http://www.pioneerelectronics.com/aharadio
Starting procedure
1 Start up the Aha Radio application in-
stalled on the iPod.
p In some iPod modes, selecting a source
may start up an iPod application. If the mes-
sage
“Start up the application from your
Device. ” appears, start up the application
from your iPod.
p Before starting up, sign-in to Aha Radio
from your iPod.
2 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 70.
3 Connect your iPod.
The source changes and then playback will
start.
= For details, refer to Connecting your iPod on
page 20.
p If the iPod is already connected, tap [aha]
on the left edge of the screen.
= For details, refer to Selecting a source on
page 70.
4 Tap [aha] on the left side of the screen
to display the
“aha” screen.
5 Use the touch panel keys on the screen
to control the Aha Radio.
= For details, refer to Using the touch panel
keys on page 129.
En
127
Chapter
26
Using
Aha
Radio
Using Aha Radio