Panasonic UF-5100 - Manual (Page 12)

12
Control Panel
- Used to enter a pause when entering or
dialling a telephone number, or to redial
the last dialled number.
- Used to start Abbreviated Dialling.
(See pages 49 and 54)
- Used to separate the Sub-Address from
the telephone number
- Used to start On-Hook Dialling. (See page 57)
- Used to switch the machine into energy saving mode. (See page 38)
- Used to set Normal, Lighter or Darker. (See page 42)
- Used to set Standard, Fine, Super-Fine or Halftone. (See page 42)
- Used to turn the verification stamp On or OFF.
Lights when the verification stamp is set to ON.
- Blinks when the machine is transmitting a document or receiving.
- Lights when trouble occurs.
Keypad
- Used for manual number dialling,
entering phone numbers, and
numerical entries.
Key
- Used to temporarily change the
dialling mode to Tone when Pulse
mode is set.
UF-6100