Panasonic UF-5100 - Manual (Page 57)

Sending Documents
57
Voice Mode Transmission
B
asi
c O
p
er
at
io
ns
On-Hook Dialling
For On-Hook Dialling, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a"/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
You will hear dial tone through the monitor speaker.
* MONITOR *
❚
3
Dial the telephone number from the keypad.
Ex: * DIALLING *
5551234❚
4
When you hear a beep, ON LINE * XMT *
5 5 5 1 2 3 4
PAUSE