Panasonic DMC-SZ02 - Manual (Page 106)

Connecting to other equipment
- 106 -
Press 3.
Press 3/4 to select an item and then press [MENU/SET].
Press 3 to select [Print start] and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
• Refer to P107 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
Press 3 to select [Print start] and then press
[MENU/SET].
• Refer to P107 for the items which can be set before starting to
print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Item Description of settings
[Multi Select]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then press [DISP.]. (When
[DISP.] is pressed again, the setting is canceled.)
• After the pictures have been selected, press [MENU/SET].
[Select All] Prints all the stored pictures.
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P93)
[Favorite] Prints the pictures set as favorites only. (P92)
100 100
0001
0001 100 0001 _ _
PictBridge PictBridge PictBridge
Multi Print Multi Print Multi Print
Select Select Select Print Print Print
1/11 1/11 1/11
OFF
1
Print start
Print with Date
Num.of prints
Paper Size
Page Layout
Single Select
Set Select Cancel