Panasonic DMC-SZ02 - Manual (Page 41)

- 41 -
Basic
• When you connect the camera to a TV, the volume of the TV speakers does not change. Also,
when connected, no sound is output from the camera speakers.
• Some subjects may appear differently from actuality on the LCD monitor. However, this does
not affect the recorded pictures.
• When [LCD Mode] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
r [Beep]
This allows you to set the beep and shutter sound.
r [Beep Level]: [Shutter Vol.]:
[t]
[u]
[s] ([Low])
([High])
([OFF]) [ ]
[ ]
[ ]
([Low])
([High])
([OFF])
[Beep Tone]:
[ ]/[ ]/[ ]
[Shutter Tone]:
[ ]/[ ]/[ ]
u [Volume] Adjust the volume of the speaker to any of the 7 levels.
[LCD Display]
Brightness, color, or red or blue tint of the LCD monitor is
adjusted.
[Brightness]:
Adjust the brightness.
[Contrast · Saturation]:
Adjust the contrast or clarity of colors.
[Red Tint]:
Adjust the red tint.
[Blue Tint]:
Adjust the blue tint.
1 Select the settings by pressing
3/4, and adjust with 2/1.
2 Press [MENU/SET] to set.
1 2 3 1 2 3