Taking pictures using the built-in flash, Switching to the appropriate flash setting, Switching to the appropriate flash – Panasonic DMC-SZ02 User Manual
Page 49: Setting, P49)
- 49 -
Recording
Applicable modes:
Taking Pictures Using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select the item and then press
[MENU/SET].
¢1 This can be set only when Intelligent Auto Mode is set.
¢2 The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal]
on the [Rec] menu is set to [ON], [
] appears on the flash
icon.
A Photo flash
Do not cover it with your fingers or other objects.
Switching to the appropriate flash setting
Item
Description of settings
[‡]
([Auto])
The flash is automatically activated when the recording
conditions make it necessary.
[
] ([iAuto])
¢1
[
] ([Auto/Red-Eye])
¢2
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce
the red-eye phenomenon (eyes of the subject appearing
red in the picture) and then activated again for the actual
recording.
•
Use this when you take pictures of people in low
lighting conditions.
[‰]
([Forced Flash On])
The flash is activated every time regardless of the
recording conditions.
•
Use this when your subject is back-lit or under
fluorescent light.
[
] ([Slow Sync./
Red-Eye])
¢2
If you take a picture with a dark background landscape,
this feature will slow the shutter speed when the flash is
activated so that the dark background will become bright.
Simultaneously, it reduces the red-eye phenomenon.
•
Use this when you take pictures of people in front of
a dark background.
[Œ]
([Forced Flash Off])
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the
use of flash is not permitted.