Paxar Monarch PPT 2700 - Manual (Page 2)

2 Operating Instructions
5. Run the application on the terminal. Your System Administrator will
instruct you how to do this.
NOTE: When using the RF link device, be sure to put your hand through
the safety strap before grabbing the handle.
Inserting/Removing the Terminal
To insert the terminal into the RF link device:
1. Hold the RF link device upright horizontally with the trigger facing
the palm of your hand. Hold the terminal with the other hand,
oriented so that the word Symbol is at the bottom.
2. Push the insert/release lever with your thumb, and slide the terminal
(bottom first) into the RF link device’s slot, making sure the RF link
device’s connector goes into the terminal’s communication port. It
will click into place.
To remove the terminal from the RF link device:
1. Hold the RF link device upright horizontally with the trigger facing
the palm of your hand.
2. Push the insert/release lever with your thumb, and pull the terminal
out of the RF link device.
Insert/Release
Lever