Palsonic 5159 - Manual (Page 12)

4.8 SLEEP BUTTON
4. 8. 1 Using SLEEP button allows you to have the appliance automatically turned off
after a pre-determined time, and set the appliance to STAND BY mode.
4. 8. 2 After the SLEEP function is set, the remaining time will be automatically displayed for
4 seconds every ten minutes.
NOTE: * If you press STAND BY button while the SLEEP function is operating, the
SLEEP function will be cancelled automatically.
* "SLEEP 0" indicates the set is in the SLEEP function-free mode.
4.9 TIMER OPERATION
Using TIMER button to select one of three timer modes, which are CLOCK mode, ON
TIMER mode and OFF TIMER mode respectively.
10
Decrease 10 minutes
at every press
SLEEP
Press
again
SLEEP 90
(GREEN)
SLEEP 0
(RED)
SLEEP 10
(GREEN)
TIMER
Press
again
Press
CLOCK
0 : 00
1 ON CLOCK
0 : 00
OFF TIME
0 : 00
SLEEP 20