Palsonic 5159 User Manual

Page 3

Advertising
background image

.

This equipment has been designed and manufactured to meet the highest international

standards, but, like any electrical apparatus which is operated at mains voltage, care must be

taken if you are to obtain the best results and safety is to be assured. This is particularly

important with audio and TV equipment.

read this handbook carefully and keep it handy for ready reference.
ensure that all electrical connections (including the mains plug, extension leads and
interconnections between pieces of equipment) are properly made and in accordance
with the manufacturer’s instructions. Check that the mains fuse rating is correct.
always call in your dealer if you are ever in doubt about the installation, operation or
safety of your equipment, he is the best person to advise you.
unplug the power cord if the appliance is left unused.
obstruct the necessary all round ventilation: moderate heat is generated when product
is operating - ensure installation is clear of curtains etc. Do not obstruct cooling
vents on rear of cabinet.

Remember that to obtain the best performance and lasting satisfaction from your
equipment : -
have it regularly maintained by a reliable service organisation: ensure that it is correctly
used by all the family.

ABOVE ALL:-

Never let children push anything into holes or slots in the cabinet - this could result in an
electric shock.
Never guess or take chances with electrical equipment of any kind - it is better to be safe than
sorry.

WARNING:

To prevent fire or shock hazard do not expose this appliance to rain or moisture.
No user serviceable parts inside. Refer servicing to qualified service personnel. Never
remove covers unless qualified to do so; this unit contains dangerous voltages.

LOCATION:

LOCATE appliance in the room where direct light does not strike the screen.
ALLOW adequate space between the appliance and the wall to permit proper ventilation.
AVOID excessive warm and dusty location to prevent possible damage to the cabinet and
component failure.
NEVER install the appliance in a strong magnetic field.
CONNECT the appliance to AC 230 or 240 V, 50Hz outlet

1

.

.

.

.

.

.

.
.

DO

DON'T

DO

DO

DO

Advertising