Panasonic KX-MB2060 - Manual (Page 99)

11.2 Cordless handset programming (KX-MB2060 optional)
To access the features, there are 2 methods:
– scrolling through the display menus (page 99)
– using the direct commands (page 100)
R Direct command is the main method used in these operating instructions.
11.2.1 Cordless handset features
Programming by scrolling through the display menus
MCNMDN MOFFN
A
1. MMENUN (soft key A)
2. Press MCN or MDN to select the desired main menu.
A MSELECTN (soft key A)
3. Press MCN or MDN to select the desired item in
sub-menu 1. A MSELECTN (soft key A)
R In some cases, you may need to select from
sub-menu 2. A MSELECTN (soft key A)
4. Press MCN or MDN to select the desired setting. A
MSAVEN (soft key A)
R This step may vary depending on the feature
being programmed.
R To exit the operation, press MOFFN.
Top-menu Sub-menu 1 Sub-menu 2 Feature (default setting)
“Caller list” – – page 55
“Answering
device” “Play new msg.” – Play new messages: page 75
“Play all msg.” – Play all messages: page 75
“Erase all msg.” – Erase all messages: page 75
“Greeting” “Record greeting” Record greeting message:
page 74
“Check greeting” Play greeting message: page 74
“Pre-recorded” Reset to pre-recorded greeting
message: page 74
“Settings” “Ring count” *1 Change the ring count (“2
rings”): page 76
“Recording time” Change the maximum recording
time (“3 min”): page 76
“Remote code” Set the remote operating ID
(“111”): page 76
“Answer on” – Turn the answering machine ON:
page 62
“Answer off” – Turn the answering machine OFF:
page 64
“V. M. access” *2 – – Voice mail access
“Intercom” – – Intercom call: page 104
“Set date & time” “Date and time” *1 – Date and time: page 28
“Alarm” – Set the alarm (“Off”): page 103
99
11. Programmable Features