PLUS Vision V-339 - Manual (Page 27)

E-26
STANDBY STATUS
MENU DCM
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.
General Operation
MUTE ECO AUTO
ASPECT
TIMER VOL KSTN ZOOM
2 3 4
FREEZE
1
Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.
FREEZE ECO AUTO
ASPECT
TIMER VOL KSTN ZOOM
1 3 4
MUTE
2
Lamp Mode
FREEZE MUTE AUTO
ASPECT
TIMER VOL KSTN ZOOM
1 2 4
ECO
3
Use this if the picture is projected on a small screen and the picture
is too bright or when projecting images in dark rooms.
Pressing the ECO button will set the lamp mode.
Eco (STATUS indicator is lit green)
The lamp’s brightness is reduced to approximately 80%, extending the
lamp’s service life.
Normal (STATUS indicator is off)
The lamp brightness is set to 100% and the screen is bright.
Note:
Frequent switching this mode can degrade the lamp.
STANDBY STATUS
MENU DCM
STATUS indicator
Selection of the Color Mode (DCM)
Select the preset color mode.
Pressing the DCM button of the projector switches the color mode.
Each time the DCM button is pressed, the screen will be black for approxi-
mately 3 seconds and then a message indicating the switched color mode
will be displayed for approximately 1.5 seconds.
Dynamic ..... Select this to prioritize brightness.
Vivid ........... Select this to prioritize color.
DCM button