PLUS Vision V-339 - Manual (Page 47)

E-46
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT (
̇̈) buttons.
View
“Vertical Flip” Off
“Horizontal Flip” Off “Vertical Flip” Off
“Horizontal Flip” On “Vertical Flip” On
“Horizontal Flip” On “Vertical Flip” On
“Horizontal Flip” Off
Keystone
Keystone distortion will occur when the projector and screen are on an
angle (in the vertical orientation). The Keystone function is used to manu-
ally adjust this distortion.
Select the item name “Keystone” and correct the keystone distortion using the
SELECT (
̇ ̈) buttons.
Press the ̇ button. Press the ̈ button.
Note:
* The menus and other on-screen displays cannot be adjusted.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion
completely.
* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.
* See “Adjustment of the Projection Screen” on Page E-22 for information about the Auto Keystone function.
See “Keystone Manual Adjustment” on Page E-27 for information about manual adjustment using the projector and the remote control.
Auto Keystone
Auto Keystone is set to provide an automatic adjustment of the key-
stone distortion.
Select the item name “Auto Keystone” and set with the SELECT (
̇̈) buttons.
On ............... provides automatic adjustment.
Off .............. does not provide automatic adjustment.
Note:
See “Adjustment of the Projection Screen” on Page E-22 for information about the Auto Keystone function.
See “Manual Adjustment of Keystone” and the aforementioned “Keystone” on Page E-27 for information about manual adjustment using the
buttons of the projector and the remote control.