Pioneer AVH-P6400 - Manual (Page 64)

En 64
13
Section
Other Functions
Setting the time
This is used to set the time on the unit’s clock
display.
1 Press
5 or ∞ to select
CLOCK ADJUST from
the SET UP MENU, and press A.MENU .
CLOCK ADJUST indications are displayed.
2 Press
5 or ∞ to select
ON or OFF .
When ON is selected, the clock is shown in the
display.
When
OFF is selected, the clock is not shown in
the display.
3 Select the portion of the time display you
wish to set with
2/3.
Pressing
2/3 will select a portion of the clock
display:
HOUR — MINUTE — ADJUST
4 Press
5 or ∞ to slide to
ADJUST , and the
minute is reset.
After reset,
00 is displayed.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Listening to XM tuner
You can use this product with a separately sold
Universal XM satellite digital tuner system (GEX-
FM903XM) or XM satellite digital tuner (GEX-
P900XM). For details concerning operation,
refer to the XM tuner’s operation manuals. This
section provides information on XM operations
with this product which differs from that
described in the XM tuner’s operation manual.
1 CH NAME indicator
Shows what channel select mode has been
selected.
CH. number is displayed when CH
NUMBER is selected, and category is dis-
played when CATEGORY is selected.
2
CH NUMBER indicator
Shows to which channel number the tuner is
tuned.
3 BAND indicator
Shows the band which has been selected.
4 P.CH indicator
Shows what preset has been selected.
5 XM Tuner information
The display is switched each time DISP is
pressed.
3 4 2
1
5