PYLE Audio PICL48 - Manual (Page 4)

TURN OFF THE ALARM
When the alarm activate, press the ‘POWER/AL.OFF’ button to turn off the alarm.
SNOOZE FUNCTION
1. Whenever the alarm activate, it can be temporarily suspended for a short period of 10
minutes by pressing the ‘SLEEP/SNOOZE’ button on the remote control.
2. The alarm will then automatically activate again after the 10 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
RADIO OPERATION
1.
Press the ‘POWER/AL OFF’ button to turn on the unit.
2. Press the ‘FUNC/CL.ADJ’ button to select the FM RADIO mode.
3. Press and hold the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button for approx. 1 second, it will start
to search the next radio station in the direction of the search. The search operation simply
finds stations with strong signals. Stations with weak signal can only be tuned in manually.
4. Press the ‘P-MODE/MONO’ button on the remote control to select stereo or mono
broadcasting.
5. Press ‘VOL+’ or ‘VOL-‘ button to adjust the volume to the desired listening level.
SAVING RADIO STATIONS IN THE MEMORY
1. Tune to the desired stations.
2. Press the ‘PROG/MEM/AL2’ button on the unit or the ‘MEM’ button on the remote control, the
display will show the next memory station number flashing.
3. Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button on the unit or the ‘M+’ or ‘M-‘ button on the
remote control to select memory number, then press ‘PROG/MEM/AL2’ button to store the
station into the memory.
4. Repeat step 1 to 3 to store more radio stations in the memory.
5. Up to maximum 20 radio stations can be stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Use the ‘STOP/MEM+/AL2’ button on the unit or the ‘M+’ or ‘M-‘ button on the remote control to
select the stored radio station.
Press the ‘STOP/MEM+/AL2’ on the unit or the ‘M+’ button on the remote to go to the next station
in the memory.
Press the ‘M-‘ button on the remote control to go back to the previous station in the memory.
- 6 -
CD OPERATION
1.
Press the ‘POWER/AL OFF’ button to turn on the unit.
2. Press the ‘FUNC/CL.ADJ’ button to select the CD mode.
3. Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the disc, it
will play the first track of the entire disc after reading.
4. Press ‘VOL+’ or ‘VOL-‘ button to adjust the volume to the desired listening level.
5. During playing, press the ‘PLAY/PAUSE/SYNC’ button to temporarily pause playing. To resume,
press the ‘PLAY/PAUSE/SYNC’ button again.
6. To stop playing, press the ‘STOP/MEM+/AL1’ button on the unit or the ‘STOP’ button on the remote
control.
Skip Mode
1.
During play or pause mode, press the ‘SKIP+/TUNE+’ button to go to the next track.
2. During play, press the ‘SKIP-/TUNE-‘ button once to go back to the beginning of the track. Press the
‘SKIP-/TUNE-‘ button twice to go back to the previous track.
3. In pause mode, press the ‘SKIP-/TUNE-‘ button to go back to the previous track.
Search Mode
1.
Press and hold the ‘SKIP+/TUNE+’ or ‘SKIP-/TUNE-‘ button to quickly advance or reverse through
the track at high speed.
2. Release the button to return to normal play.
Different Play Mode
Press the ‘P-MODE/MONO’ button on the remote control to select different kinds of play mode with the
following sequence.
Repeat
 Repeat All  Random  Normal
REPEAT - the track being played and will repeat continuously.
REPEAT ALL - the whole disc will repeat continuously.
RANDOM – the tracks in the disc will be played in random sequence.
Programming
The programming should be done in STOP mode
1.
Press the ‘PROG/MEM/AL2‘ on the unit or ‘PROG’ button on the remote control, LCD display will
show ‘ 1 : - - ‘ with ‘ - - ‘ flash continuously.
2. Use the “SKIP+/TUNE+” or “SKIP-/TUNE-“ button to select the desired track.
3. Press the “PROG/MEM/AL2‘ on the unit or ‘PROG’ button on the remote control again to store the
selected track in the memory, the LCD display will show ‘ 2 : - - ‘ and flash continuously.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory.
5. Press the ‘PLAY/PAUSE/SYNC’ button to start playing the disc in the programmed order.
6. To stop playing, press the ‘STOP’ button.
7. To cancel the programming list, press the ‘STOP’ button till the ‘STOP’ disappear from the LCD
display or select a different function RADIO, AUX or iPOD/iPHONE.
- 7 -