Planet Technology GSW-601S - Manual (Page 14)

PLANET NOVASwitch series 14
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation.
To reliably operate your network at 100Mbps and
1000Mbps, you must use an Unshielded Twisted-Pair
(UTP) Category 5 cable, or better Data Grade cabling.
While a Category 3 or 4 cable may initially seem to work,
it will soon cause data loss.
2.3.2 Connecting to Network Backbone or
Server
Connect to the Gigabit Ethernet ports with Category 5
copper cable or fiber optic cable for uplinking to a
network backbone or network server. These ports
operate at 1000Mbps in full-duplex mode. A valid
connection is indicated when the Link LED is light. The
following sections describe the function of LEDs on the
front panel
CPU LED
Color Green
Label Smart
Function: The LED light up steadily means CPU
completed to initial the switch.
Power LED
Color Green
Label PWR
Function: The LED light up steadily means Power turned
on.