Planet Technology GSW-601S - Manual (Page 31)

GSW-601S User's Manual
31
4.4 Auto-Negotiation
The STP ports on the Switch have built-in
“Auto-negotiation”. This technology automatically sets the
best possible bandwidth when a connection is established
with another network device (usually at Power On or
Reset). This is done by detect the modes and speeds at
the second of both device is connected and capable of,
Both 10Base-T and 100Base-TX devices can connect with
the port in either Half- or Full-Duplex mode. 1000Base-T
and 1000Base-SX can only connected in Full-duplex
mode.