Panasonic SC-HT640W - Manual (Page 22)

RQ
T
8
6
1
1
22
Cha
nging
the
pla
y
er s
e
ttin
g
s
Changing the player settings
∫ “Video” tab
§ Refer to “Frame still and field still” ( ➜ page 11, Glossary).
∫ “Audio” tab
∫ “Display” tab
∫ “Others” tab
QUICK SETUP enables successive settings of the items in the shaded area.
TV Aspect
Choose the setting to suit your
television and preference.
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
TV Type
Select to suit the type of television.
≥ Standard (Direct View TV) ≥ CRT Projector ≥ LCD TV/Projector
≥ Projection TV ≥ Plasma TV
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
≥ 0ms ≥ 20ms ≥ 40ms ≥ 60ms ≥ 80ms ≥ 100ms
Still Mode
Specify the type of picture shown
when paused.
≥ Automatic
≥ Field
§ : The picture is not blurred, but picture quality is lower.
≥ Frame § : Overall quality is high, but the picture may appear blurred.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
≥ Lighter: When connected through VIDEO OUT or S-VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT (Y/P
B /P R ).
Dynamic Range Compression ≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
Speaker Settings ( ➜ page 23)
Set the delay time for your center and
surround speakers.
≥ Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R): 0.0/5.0/10.0/15.0 ms
Menu Language ≥ English ≥ Français ≥ Español
On-Screen Messages ≥ On ≥ Off
FL Dimmer
Change the brightness of the unit’s
display.
≥ Bright ≥ Dim
≥ Auto: The display is dimmed, but brightens when you perform some operations.
QUICK SETUP ≥ Yes ≥ No
Re-initialize Setting
Return all values in the Setup menus
to the default settings.
≥ Yes: The password screen is shown if “Ratings” ( ➜ page 21) is set. Please enter the same password.
After “INIT” on the display disappears, turn the unit off and on again.
≥ No
HT640W.book Page 22 Thursday, January 5, 2006 11:19 AM