Panasonic SC-HT640W - Manual (Page 8)

R
Q
T
8611
8
Simple
Se
tu
p Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
Aim at the display ( ➜ page 9), avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, refer to its operating instructions.
≥ This remote control can perform some basic television operations (
➜ page 28).
To change these settings later
Select “QUICK SETUP” in the “Others” tab (
➜ page 22).
STEP
6
Preparing the remote control
R6/LR6, AA
1
3
2
Remote control Batteries
Insert so the poles ( i and j) match those in the remote control.
≥ Do not use rechargeable type
batteries.
1 2 3 4 5 6
Turn on the
unit. Select
“DVD/CD”. Press and hold to
show the QUICK
SETUP screen. Follow the messages and
make the settings. Press to finish
QUICK SETUP. Press and
hold to exit.
STEP
7
Performing QUICK SETUP
Select
Register
ENTER
Prepa
ri
ng th
e rem
o
te
contr
o
l /
P
e
rf
ormin
g
Q
U
ICK SETUP
HT640W.book Page 8 Thursday, January 5, 2006 11:19 AM