Panasonic DMR-ES10 - Manual (Page 27)

RQT8009
27
Editing
Multiple editing is possible.
Multiple editing is possible.
Title operations
Erase Title
Press [ w, q] to select “Erase” and press [ENTER].
•
Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
•
The available recording space on DVD-R or +R does not increase when you erase titles.
•
Available recording space on a DVD-RW (DVD-Video format) increases only when the last recorded title is
erased. It does not increase if other titles are erased.
Properties
Information (e.g., time and date) is shown.
•
Press [ENTER] to exit the screen.
Title Name
You can give names to recorded titles.
➔ page 31, Entering text
Setup Protection
Cancel Protection
If set, this will protect the title from accidental erasure.
Press [ w, q] to select “Yes” and press [ENTER].
The lock symbol appears when the title is protected.
Shorten Title
( ➔ below, “For quicker
editing”)
You can remove unnecessary parts of the recording such as commercials.
Press [ENTER] at the start point and end point of the
section you want to erase.
Press [
e, r] to select “Exit” and press [ENTER].
•
Select “Next” and press [ENTER] to erase other sections.
Press [ w, q] to select “Erase” and press [ENTER].
Change Thumbnail
( ➔ below, “For quicker
editing”)
You can change the image to be shown as a thumbnail picture in the Title
View.
Press [ q] (PLAY) to start play.
Press [ENTER] when the image you want to use as a
thumbnail is shown.
To change the thumbnail
Restart play and press [
e, r] to select “Change”, then press [ENTER] at
the point you want to use as the thumbnail.
Press [ e, r] to select “Exit” and press [ENTER].
Divide Title
( ➔ below, “For quicker
editing”)
You can divide a title into two.
Press [ENTER] at the point you want to divide the title.
Press [
e, r] to select “Exit” and press [ENTER].
Press [ w, q] to select “Divide” and press [ENTER].
To confirm the division point
Press [
e, r] to select “Preview” and press [ENTER]. (The unit plays 10
seconds before and after the division point.)
To change the division point
Restart play and press [
e, r] to select “Divide”, then press [ENTER] at the point you want to change.
Note
•
The divided titles retain the name and CPRM property ( ➔ page 36) of the original title.
•
Video and audio just before and after the dividing point may momentarily cut out.
RAM -R -RW(V) +R
RAM -R -RW(V) +R
-RW(VR)
Properties
No.
Ch.
Date
01
4
6/20/2002 Wed
Start
Rec. time
10:00 AM
2:15 (SP)
Dinosaur
ENTER
RAM -R -RW(V) +R
RAM
DVD-RAM
DIRECT NAVIGATOR Title V
10 10/27 Mon
07 08
8 10/27 Mo
- - - -
RAM
DVD-RAM
DIRECT NAVIGATOR Partial Erase
Start
Next
Exit
0:43.21
Play 08
End
- -:- -.- - - -:- -.- -
Start End
ENTER
1
2
3
RAM -R -RW(V) +R
DVD-RAM
DIRECT NAVIGATOR Change Thumbnail
Change
Exit
0:00.01
00:00.01
Change Start play and select
the thumbnail position.
08
ENTER
1
2
3
RAM
DVD-RAM
DIRECT NAVIGATOR Divide Title
0:00.11
--:--.--
Divide
08
Divide
Exit
Play
Preview
ENTER
1
2
3
Chapter operations
Erase Chapter
Press [ w, q] to select “Erase” and press [ENTER].
•
Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
Create Chapter
( ➔ below, “For quicker
editing”)
Press [ENTER] at the point you want to divide.
•
Repeat this step to divide at other points.
Press [ e, r] to select “Exit” and press [ENTER].
Combine Chapters
Press [ w, q] to select “Combine” and press [ENTER].
•
The selected chapter and following chapter are combined.
RAM
RAM
DVD-RAM
DIRECT NAVIGATOR Create Chapter
Create
Exit
0:43.21
PLAY 08
ENTER
1
2
RAM
For quicker editing
•
Use search, Time Slip or slow-motion ( ➔ page 21) to find the desired point.
•
Press [ u, i] to skip to the end of a title.