Operations, Control guide, Main unit – Panasonic SA-XR55 User Manual

Page 16: Display indicators

Advertising
background image

16

R

Q

T

7994

Conne

ct

ions

Se

tti

ngs

Bas

ic O

p

er

at

io

n

s

O

p

er

at

io

n

s

Bef

o

re

use

Ref

er

ence

Control guide

DIGITAL EX and

EX are displayed only when “1 SPKR ” is selected in “Surround back speaker settings”. (ápage 12)

PL is displayed when using Dolby Pro Logic

with stereo (2-channel) sources and “

SB ” is set to “_” in “Speakers combination settings”. (ápage 12)

Main unit

[8, POWER]

Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.

Standby indicator [^]

When the unit is connected to the AC mains
supply, this indicator lights up in standby mode
and goes out when the unit is turned on.

[SPEAKERS, A, B]

For selecting speakers A or B.
Turning the speakers off
automatically engages the
STEREO/2CH MIX mode (when
listening through headphones, for
example).

[MULTI CONTROL, CANCEL]

Press to enter Multi control or cancel.

[ENTER]

Enters setting in Multi control.

[INPUT SELECTOR]

For selecting input.
Selects each setting in Multi control.

[VOLUME]

Volume
control.

Remote
control signal
sensor
[VCR 2]

For a game player,
etc.

[DUAL AMP]

Lights when the
DUAL AMP function
is activated.

[BI-AMP]

Lights when the BI-
AMP function is
activated.

[BAND]

For switching between FM and AM.

[PRESET]

Press to allow preset station selection with [2 TUNE 1].

[2 TUNE 1]

For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start
automatic tuning. Tuning stops when a station is found.

[PHONES]

Headphone jack.
Plug type: 6.3 mm (1/4") stereo
Avoid listening for prolonged
periods of time to prevent hearing
damage.
Turn the speakers off when using
the headphones.

Display indicators

[RE-MASTER]

Lights when the multi-source
re-master function is on.

[MULTI CONTROL]

When you press the [MULTI
CONTROL, CANCEL] button
and enter the settings the
indicator lights.

[SLEEP]

Sleep timer indicator.

[TUNED]

A station is tuned.

[ST]

A stereo FM broadcast is tuned.

[MONO]

Lights when using the monaural
mode.

[

]

Flashes during automatic
presetting.

[DIGITAL INPUT]

• The channels contained in the digital input signal light.
• No sound is output from a channel if the speaker is set to “

_” (not connected) in

“Speakers combination settings” (ápage 12) even if the channel indicator lights.
L: Front left channel

C: Center channel

R: Front right channel

LS: Surround left channel

SB: Surround back channel

RS: Surround right channel

S: If the surround channel is monaural
LFE (Low Frequency Effects): Deep-bass effect

[PCM]

Lights when the PCM FIX mode is set.

[– SPEAKERS –

,

,

]

Speaker indicators.

General
display

Shows the input
mode, radio
frequency, and
other general
information.

[2CH MIX]

Lights when playing a
multi-channel source in
2CH MIX mode.

[kHz, MHz]

Frequency unit indicators.

kHz:

AM, or PCM sampling
frequency

MHz:

FM

[SOUND MODE]

The following light to
indicate the source’s
input signal (multi-
channel digital signal)
and the decoding
format used. (ábelow)

A:

Sound is output from speakers connected to the
front A, surround, and center terminals.

B:

Sound is output only from speakers connected to
the front B terminals.

A, B:

Sound is output from speakers connected to the
front A, B, surround, and center terminals.

A, B, BI-WIRE: Sound is output from speakers connected by Bi-wiring.

SOUND MODE

DIGITAL:
DIGITAL EX:

EX:

DTS-ES:
DTS:
DTS 96/24:
STEREO:

Dolby Digital decoder is being used.
Dolby Digital Surround EX decoder (Dolby Pro Logic

decoder) is being used when

the input signal is Dolby Digital 5.1-channel or Dolby Digital Surround EX.
Dolby Digital Surround EX decoder (Dolby Pro Logic

decoder) is being used when the input signal is DTS.

DTS-ES discrete or matrix decoder is being used.
DTS decoder is being used.
DTS 96/24 decoder is being used.
2-channel stereo decoder is being used.

PL

:

PL :

NEO:6:

SFC:

Dolby Pro Logic
decoder is being used.
Dolby Pro Logic
decoder is being used.
DTS NEO:6 matrix
decoder is being used.
SFC matrix function is
being used.

VOLUME

INPUT SELECTOR

UP

DOWN

ENTER

CANCEL

TUNE

PRESET

SPEAKERS

POWER

A

B

BAND

BI-AMP

DUAL AMP

MULTI

CONTROL

PHONES

VCR 2

VIDEO IN

AUDIO IN

L

R

M

TUNED ST MONO

SOUND MODE

RE-MASTER

SLEEP

SPEAKERS

2CH

MIX

kHz

MHz

DTS

STEREO

NEO:6 SFC

DTS 96/24

EX

DIGITAL

EX

x

PL

-ES

PCM

L

C

R

LS

SB

RS

S

LFE

A B BI-WIRE

DIGITAL INPUT

M

MULTI CONTROL

A

B

BI-WIRE

Advertising