Remote control, Limitations on using surround effects – Panasonic SA-XR55 User Manual
Page 17
17
R
Q
T
7994
C
o
nne
ct
ion
s
Se
tt
ings
B
asic
O
p
era
tio
n
s
Bef
o
re
use
Ope
ra
tions
Re
fe
re
n
ce
Buttons not explained on this page are used only to operate other equipment.
á
Refer to the separate booklet, “Remote Control Operation Guide”, for remote control operation details.
Depending on the speaker settings and input signal (audio signal recorded on the disc etc.), some surround effects cannot be used.
Remote control
[CD, VCR, TUNER –BAND, TV,
DVD RECORDER,
DVD PLAYER
–
ANALOG 6CH]
Input mode and remote control mode
buttons.
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations by
frequency.
[ ≧ 10, ENTER]
To enter two digit channels.
[1, CH, 2]
For selecting preset radio channels.
[4, 3, VOLUME]
To adjust the volume.
[MULTI-SOURCE RE-MASTER]
For selecting a re-master mode.
[SUBWOOFER]
For selecting subwoofer level.
[DIMMER]
For dimming the unit’s display.
[MUTING]
To mute the volume.
[
PL
]
Select MOVIE (DOLBY EX), MUSIC or
GAME when Dolby Pro Logic
mode or
Dolby Pro Logic mode is on.
[DTS NEO:6]
For selecting a DTS NEO:6 mode:
CINEMA or MUSIC.
[SFC, MUSIC]
For selecting a SFC mode:
LIVE, POP/ROCK, VOCAL, JAZZ or DANCE.
[SFC, AV/MOVIE]
For selecting a SFC mode:
DRAMA, ACTION, SPORTS, MUSICAL or
GAME.
[OFF]
To cancel surround effects.
[TEST]
To start the speaker test signal.
[LEVEL]
To adjust speaker level.
[EFFECT]
To adjust Dolby Pro Logic
, DTS NEO:6
or SFC effects.
[w, 3, q, 4]
First select EFFECT, LEVEL or SFC, and
then press [w, 3] or [q, 4] to complete
the setting.
Limitations on using surround effects
(
á
page 15
)
Speaker settings
Input signal
Surround effects that cannot be used
Only front L/R
+
All
• Dolby Pro Logic
• SFC
• DTS NEO:6
Front L/R + Center
+
Multi-channel
• Dolby Pro Logic
• SFC
• DTS NEO:6
Front L/R + Center
+
2-channel
• GAME mode (Dolby Pro Logic
)
No surround back
+
Multi-channel
• Dolby Pro Logic
• DTS NEO:6
Input signal (
( ) are display indicators ápage 16
)
Surround effects that cannot be used
• 1-channel (
)
• Surround sound is monaural (
)
Excluding 2-channel sources
• 3-channel (
)
• PCM with a sampling frequency
exceeding 96 kHz
• Dolby Pro Logic
• SFC
• DTS NEO:6
• DTS-ES
• DTS 96/24-ES
• Dolby Pro Logic
• DTS NEO:6
C
S
L
C
R