Psion Teklogix Vehicle-Mount Computer 8530 G2 - Manual (Page 26)

20 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer Quick Start Guide
1.5 Connecting To An 802.11 Network
In most cases, the 8525 G2/8530 G2 must be configured before it
can connect to an 802.11 wireless network. The 8525 G2/8530 G2
Vehicle-Mount Computer User Manual (PN 8000083) describes this
configuration process. Refer to “Configuring An IEEE 802.11
Radio” in Chapter 2: Basic Checkout for details. Once the 8525 G2/
8530 G2 is properly configured, it automatically connects to your
wireless network within a few moments of switching on. A radio
icon in the taskbar indicates a successful network connection along
with the quality of the radio reception.
1.6 Resetting The 8525 G2/8530 G2 Vehicle-Mount
Important: Because Psion Teklogix cannot guarantee what has
been saved (registry) after a reset, this should be con-
sidered as a last resort.
To reset the 8525 G2/8530 G2:
• Press and hold down the [BLUE] key and the [ENTER/ON]
key simultaneously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory
contents are lost. While it is most likely that the contents of the flash
memory and memory card will be preserved, Psion Teklogix cannot
guarantee this.
Note: On the 8530 G2, pressing and holding down the ‘on/off’
switch on the right side of the unit for 10 or more seconds
resets the unit.