Psion Teklogix Vehicle-Mount Computer 8530 G2 User Manual
Page 38
32
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer Quick Start Guide
PWR/CHG – Charge LED
The lower-right LED is reserved for internal charger/power status.
This LED operates as follows:
RX/TX – Radio Traffic LED
The upper-left LED on your 8525 G2/8530 G2 flashes either yellow
or green to indicate when the radio transmits and receives data.
Note: Keep in mind that while 802.11b/g radios support the
transmit/receive LED, not all radios support this function.
Scan LED
Successful scans are indicated in two ways – with a scan LED and
with an audio tone.
LED Behaviour
Description
Solid green
External power in use. Backup battery is present.
Slow flashing green
External power in use. Backup battery not present.
Blinking yellow
External power not in use. Unit drawing power
from backup battery.
Function
Radio Traffic LED Behaviour
Radio Transmit
LED flashes yellow.
Radio Receive
LED flashes green.
Function
Scan LED Behaviour
Scan in progress
LED displays solid red during scan.
Successful scan
LED displays solid green after decode.
Off when scan ended.
Unsuccessful scan
LED flashes red.