Psion Teklogix Vehicle-Mount Computer 8530 G2 - Manual (Page 44)

38 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer Quick Start Guide
To adjust the beeper volume:
• Lock the [BLUE] key ‘on’.
• Press the increase volume key or the decrease volume key
until the volume meets your needs.
• Press the [BLUE] key again to ‘unlock’ it.
2.6 Monitoring The Network Connection
If your vehicle-mount is equipped with a wireless-LAN radio, it will
typically associate with the nearest access point. The radio signal
quality meter in the taskbar indicates the relative strength of the
communication link.
To access the radio signal icon from the keyboard:
• Double-tap on the radio icon in the taskbar to display the
Wireless Statistics dialog box.
Note: Moving in and out of the radio coverage area can have vary-
ing effects on a network session. At times, you may need to
renew your connection by logging in again.
2.7 Scanning Techniques
Note: External scanners can be connected to the 8525 G2/8530 G2
tether, serial or USB device port.
• Hold the scanner at an angle. Do not hold it perpendicular to
the bar code.
• Do not hold the scanner directly over the bar code. In this
position, light can reflect back into the scanner’s exit window
and prevent a successful decode.
• Scan the entire bar code. If you are using a 1D or 2D scanner,
make certain that the scan beam crosses every bar and space
on the bar code, including the margins on either end of
the symbol.