Panasonic DVD-RA60 - Manual (Page 23)

23
RQT6270
Home Theater
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER
AUDIO OUT
SUB-
WOOFER R R
FRONT
R
SURROUND
VIDEO
OUT
S VIDEO
OUT
OPTICAL
SURROUND
L
FRONT
L L
2ch 5.1ch
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER
AUDIO OUT
SUB-
WOOFER R R
FRONT
R
SURROUND
VIDEO
OUT
S VIDEO
OUT
OPTICAL
SURROUND
L
FRONT
L L
2ch 5.1ch
SUB-
WOOFER
SURROUND FRONT CENTER
(L) (R) (R) (L)
OPTICAL
ª B
Connecting an amplifier with a
built-in decoder or a decoder-
amplifier combination
ª A
Connecting an amplifier with
5.1-channel audio input terminals
Change “Speaker setting” ( ➡ page 20).
Note
≥ Turn speaker and headphone V.S.S. ( ➡ page 11) off when you
connect through the 5.1-channel output terminals. The unit does
not output the signals for channels other than the front speakers
when V.S.S. is on.
≥ If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
Change “Digital output” ( ➡ page 21).
Note
You cannot use DTS Digital Surround decoders not suited to
DVD-Video.
Optical digital audio cable
Do not bend sharply when
connecting.
Amplifier
Connect cables to
terminals
corresponding to the
speakers you have
connected.
Audio cable
White (L)
Red (R)
Insert fully,
with this side
facing up.