Polycom RMX DOC2560B - Manual (Page 122)

Chapter 3-Basic Operation
3-44
Text Indication
The Text Indication appears in the window of the current speaker in the
participant’s layout in addition to the endpoint name. It displays the
conference Secure mode (on or off), total number of connected
participants, number of video participants and number of audio
participants.
The text indication is automatically displayed when there is a change in
the conference Secure state (when Secure is implemented or cancelled)
and it appears only for a few seconds (the same duration as the endpoint
names).
The conference chairperson or participants can request the display of a
Textual Indication of the conference’s statistics by entering the DTMF code
*88 on the endpoint’s DTMF input device, such as remote control.
The Text Indication is displayed according to the permission set in the
Conference IVR Service:
•
Chairperson permission: Only the chairperson sees the indication
• Everyone permission: All participants see the indication.
Text Indication can be disabled by adding a new flag to the System
Configuration and setting its value to NO as follows:
ENABLE_TEXTUAL_CONFERENCE_STATUS=NO.
Endpoint Name
Current Speaker
Participant’s Layout
Text Indicator
Participants connected as Secondary (no video) will be considered as audio
participants; defined participant which are not currently connected to the
conference (disconnected, redial, disconnecting, etc.) are not counted.