Pioneer DVD-V5000 RS-232C - Manual (Page 32)

DVD-V5000 DVD Player
RS-232 Command Protocol
Explanation : This symbol can be used in place of a Time Code or a Frame
number as a target address for the Search or Auto Stop functions.
If the player has read the Table of Contents (TOC) from a disc, the Lead-Out
Address or Frame Number can be translated into the lead-out Time.
The Lead-Out Search command on a CD or VCD disc stops the player at the
end of a program area prior to the read-out area while the Lead-Out Search
command on a DVD disc stops the player at the end of this Title.
NOTE: On a VCD disc, the Search address is set several seconds prior to the
lead-out point because the Lead-Out command requires the player to read
video data in advance.
Execution :
String Status Return DVD player
LOSE<CR> R<CR> Search to Still mode
?T<CR> 13642<CR> Time code in program end area
LOPL<CR> R<CR> Continue playing to lead-out and
then return R<CR>
5.16 Clear
Function : Clears the digit buffer or mode
Format : CL
Explanation : The command clears the digit buffer content (input value) and
returns the completed status message immediately.
The command releases the Auto Stop or the Stop Marker modes and returns
the completed status message immediately. After the commands are
released, the player begins normal playback. But the command does not
release the Multi Speed command.
The Clear command releases the Repeat mode and erases the Command
Stack selections.
Execution :
String Status Return DVD player
FR22000CL2300SE<CR> searches to
Frame 2300
Play mode
R<CR> Still mode
TM500SMPL<CR> R<CR> Play with Stop Marker
CL<CR> R<CR> Stop Marker is released
and player begins
normal playback
- 25