Pioneer DVD-V5000 RS-232C - Manual (Page 54)

DVD-V5000 DVD Player
RS-232 Command Protocol
The user’s area has lines numbered from 0 to 9 with a total of 10 lines
available. If line 0 is designated to show system information, all following
lines are hidden.
The player allows/displays up to 320 characters (32 characters per line with
10 lines available). Follow the instructions below to create a User’s Display:
1. Select User's Display in Register A
2. Set the display data using a print character command
3. Turn display switch ON
Execution :
String Status Return DVD player
1DS<CR> R<CR> Display Off to Display On
1RA<CR> R<CR> Only Frame number is displayed
6.14 Register D Set
Function : current setting of Register D is rewritten
Format : Integer RD
Explanation : Register D contains the termination setting of the serial
communication (RS232). There are two choices, “CR” or “CR + LF”. The
default for Register D is 0.
Argument Function
0 (default) CR
64 CR + LF
6.15 Print Character
Function : Characters are written into the User's Display Area
(Not to be issued simultaneously with other commands)
Format : Integer PR <CR>
Character string <CR>
Explanation : The command writes a character string for one line into the User
Display Area (turn ON the User Display Specification in Register A).
Follow the instructions listed below to create printed characters.
1. Specify the line number using an integer in the range 0 ~ 9
- 47