Panasonic DP-6530 - Manual (Page 28)

1
2
3
4
5
6
7
8
9
10
11
12
2-4
HOW TO MAKE COPIES
Feeder
Drawers
Tandem LCF
External LCF
(optional)
Sheet Bypass
Paper Type
Plain Paper
(17- 20 lb Bond)
Thick 1
( - 90 lb Index)
Thick 2
( -110 lb Index)
Tab paper
Plain Paper
(17 - 20 lb Bond)
Thick 1
(-90 lb Index)
Thick 2
(-110 lb Index)
Plain Paper
(17 - 20 lb Bond)
Thick 1
(-90 lb Index)
Thick 2
(-110 lb Index)
Plain Paper
(17- 20 lb Bond)
Thick 1
(-90 lb Index)
Thick 2
(-110 lb Index)
Tracing Paper
Tab paper
OHP film
2. SETTING COPY PAPER
Acceptable Copy Paper Types and Sizes
For optimum copy quality, use the paper recommended by Panasonic. Consult your service technician for
details.
Paper Size
(Standard size)
LD, LG, LT, LT -R, ST-R, COMP
(10 1 /
8
” x 14”), 13” LG (8 1 /
2
” x13”)
8.5” SQ (8 1 /
2
” x 8 1 /
2
”)
(Standard size)
LT
(Standard size)
LT
(Standard size)
LT
(Standard size)
LD, LG, LT, LT -R, ST-R,COMP, 13”
LG, 8.5” SQ
(Non-Standard size)
Length: 3.9” - 12”
Width: 5.8” - 18”
(Standard size)
LT
(Standard size)
LT
Remarks
500 sheets (20 lb Bond)
NOTE: LD: Ledger, LG:
Legal, LT: Letter, LT-R:
Letter-R, ST-R: Invoice-R
Only the 2nd drawer can
be set *1
2500 sheets (20 lb Bond)
4000 sheets (20 lb Bond)
100 sheets (20 lb Bond)
*1
*1
*1, *2
*1: Automatic duplex copying is not available.
*2: Available only when non-sort non-staple mode. Staple and hole punch is not available.
- Paper between 20 lb Bond and 110 lb Index can be copied if the thick mode is used.
- The following sizes of paper can be used for hole punch: LG, LT-R (2 holes, 0.315” diameter), LD, LT
( 3 holes, 0.315” diameter)
- “Maximum capacity” refers to the number of sheets when the paper recommended by Panasonic is set.