Panasonic DP-6530 - Manual (Page 37)

1
2
3
4
5
6
7
8
9
10
11
12
2-13
4. AUTO JOB START (JOB PRESET)
While multi-copying is in process, you can reserve the next copy.
1 Place the original(s). Page 2-9
2 Press the START key.
- Up to 5 jobs including the current printing job can be
stored in the memory. Place the originals of the 6th job on
the original glass or the reversing automatic document
feeder and press the START key. The following
message will appear:
Select copy modes as required.
Auto Start
Confirming and Cancelling Auto Job Start
Cancelling the job while waiting for the original to be stored
in the memory.
If you want to cancel copying the original when it has
already been set on the glass or the reversing automatic
document feeder and the following message is displayed:
Auto Start
press the FUNCTION CLEAR or the STOP key.
Cancelling the job while waiting for the original to be copied.
Deleting the data waiting to be printed (except for the case above)
Page 2-15
Confirming auto job start
Press the JOB STATUS key on the control panel, then the
JOB LIST key on the touch panel.