Panasonic VB-44240A - Manual (Page 14)

Understanding Your Telephone
4
H ANDSET O VERVIEW
The 900 MHz handset has a two-line LCD display.
Each line displays up to 16 alphanumeric characters.
The display can also show up to four icons:
(Talk, Ringer Off,
Battery Low, and
Message)
Handset Modes
Your handset operates primarily in these modes:
Standby, Talk, or Programming.
When you place a call, receive a call, or when you
are in a converstation, the handset is in Talk mode
and the Talk icon
is displayed. The Talk
icon blinks when Muting is turned on or during
channel changes.
When you place a call, the handset LCD display
shows the number you are dialing. When receiving
an incoming call, the display shows information
about the calling party such as phone number and
name (if incoming line is equipped with Caller ID).
When you are not receiving a call or dialing, the
handset goes into Standby mode. The display is
blank, unless the 900 Mhz handset or the key
telephone has a call holding.
If either of these conditions occurs, the second line of
the handset display shows the identity of the party on
900 MHz UG.book Page 4 Wednesday, June 13, 2001 12:42 PM