Panasonic VB-44240A - Manual (Page 35)

Using Your 900 MHz Cordless Telephone
900 MHz Cordless Telephone User Guide 25
S WITCHING C ALLS B ETWEEN T ELEPHONES
The 900 MHz cordless telephone base station allows
you to switch calls between the 900 MHz handset
and the key telephone.
Caution: Do not press the buttons labeled "Desk"
or "Cordless" on the base station when
receiving a call. Doing so may
disconnect the call.
Switching a call from 900 MHz handset to key
telephone
To switch during an active call:
1. Press HOLD on the 900 MHz handset.
2. Press TALK on the 900 MHz handset.
3. Press the DESK button on the base station.
4. Pick up the receiver on the key telephone.
Note:
• When the base station is operating with the key
telephone, and you press the 900 MHz handset
TALK button, there is no handset tone. The hand-
set displays LINE IN USE for 5 seconds.
• If the PBX is powered off and on while the base
station is in use, it may be necessary to reset the
base station. You can do so by powering the base
station off and on.
900 MHz UG.book Page 25 Wednesday, June 13, 2001 12:42 PM