Panasonic ES8109 - Manual (Page 8)

8
English
Cleaning the shaver
1
2
1 1
Insert the appliance
plug.
2 2
Plug in the adaptor.
Remove any soap or water on
the shaver if it has been
washed with hand soap or
any other detergent. •
3 3
Remove the
protective cap  and
then attach the
shaver.
Turn the shaver off before
attaching.
Check that the outer foil is not
deformed or damaged when
you are attaching the shaver. •
•
4 4
Press [SELECT] to select the course.
Each time you press [SELECT], the course changes from “Clean/
Dry/Charge”
 “Clean/Dry”  “Dry/Charge”  “Dry”  “Charge”.
The courses start approximately 6 seconds after they are
selected.
The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
•
•
•
•
Course
Course selection indications
On shaver

Course completion summary
On recharger
Changeable course
halfway through
On recharger On shaver Time required
(guide) [In the low
temperature]
CLEAN DRY CHARGE CLEAN DRY CHARGE
1 Charge * 2345 Glows  Blinks 1 hour
2 Clean/Dry/
Charge
3
Glows while
charging
 Blinks  hours [+30 min]
3 Clean/Dry 2 –  – 1 hour [+30 min]
4 Dry/Charge 235
Glows while
charging
 Blinks  h 40 min
5 Dry 234 –  – 1 h 40 min
*The lamp goes out in 6 seconds.
1
ES8109_USA.indb 8 2007/07/25 13:23:20