Polycom KIRK 14117800 - Manual (Page 83)

Configuring KIRK Wireless Server 600v3 83
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 17
Wireless Server 600v3 Single-cell installation
For information on accessing the web based Administration Page, refer to “Accessing the
Web Based Administration Page” on page 79 .
This section contains information about:
• “Entering a System User Name and Password” on page 83
• “Assigning a Specific IP Address” on page 84
• “Configuring Ethernet Link” on page 86
• “Configuring DECT System” on page 87
• “Configuring DECT Master” on page 88
• “Configuring DECT Radio” on page 89
• “Configuring TOS (Type of Service) Priorities” on page 89
7.5.1 Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user name and a
password.
Note: The default user name of the system is admin and the default password of the
system is ip1200.