Pitney Bowes ADDRESSRIGHT DA950 - Manual (Page 10)

AddressRight® DA950 Printer
Page 10 of 10
Installation Instructions
SV61184 Rev. B
Installing the Printer
Driver and Envelope
Designer Plus™
Refer to SV61108, Installing Printer Drivers and Envelope Designer™ Plus for
AddressRight® DA Printing Systems and DocuMatch®, for instructions on installing
the printer driver.
Installing New Bulk Ink Cartridges
The bulk ink tray can hold up to six bulk
ink cartridges; one to hook up to each
of the six print heads.
1. Stack the bulk ink reservoirs on the
bulk ink tray.
2. Route (up to three cables) through
the notches on either side of the
bulk ink assembly as shown at right.
Route cables here
3. Lift the printer cover and route the
cables through the notch as shown
at right.
4. Gently remove both pieces of tape
covering the ink nozzles on the print
cartridge
5. Plug the nozzle on the cable into the
print cartridge.
6. Lift the blue tab and slide the car-
tridge into place.
Assembling the
Printer
(continued)
Route cables here
Performing Print Head
Calibration
Refer to pages 3-17 through 3-20 of SV61185, DA950 Service Manual, for instruc-
tions on print head calibration..