Pitney Bowes ADDRESSRIGHT DA950 - Manual (Page 4)

AddressRight® DA950 Printer
Page 4 of 10
Installation Instructions
SV61184 Rev. B Page 5 of 10
AddressRight® DA950 Printer Installation Instructions
SV61184 Rev. B
Assembling the
Printer
(continued)
2. Installing the Gas Shock
A. Insert the screw through the hole on
the printer wall and secure with the
bolt provided.
B. Snap the shock onto the bolt as
shown in the picture at right.
C. Snap the other end of the shock
onto the bolt inside the printer cov-
er.
D. Push in the plastic end caps to lock
the shock onto each ball attach-
ment.
NOTE: This cap must be pulled
open to remove the shock.