Panasonic CQ-R223W - Manual (Page 10)

E
N
G
L
I
S
H
8
CQ-R223W
19
E
N
G
L
I
S
H
7
CD Changer Control
CQ-R223W
18
CD Changer mode
While a disc magazine is inserted in the CD changer, press [MODE].
Play starts from the first track.
Disc Selection
[1] ({ DISC): Previous disc.
[2] (} DISC): Next disc.
Note: The cassette, if loaded, should be
removed. Otherwise, the CD play will not start.
Display change
Press [DISP] (display) to switch to the clock display.
M O D E
CQ-R223W DOLBY B NR
D IS P
TRACK
TUNE
REMOTE
LO UD
MONO MUTE
DISC SCAN REPEAT RANDOM
APM
B A N D
PW
R
VOL / P US H SE L
1 MTL NR 2 5 B•S 6 3 TPS REP 4 1 MTL NR 2 D IS P
M O D E
TRACK
TUNE
Track Selection
Press [TRACK 7] once to go to the next track, Press
repeatedly to step forward through all the tracks.
Press [TRACK 6] once to play from the beginning of the
current track, Press twice to play the previous track. Press
repeatedly to step backward through all the tracks.
Track Search
Press and hold [TRACK 7] or [TRACK 6] for more than
0.5 second to activate fast forward or reverse through a
track. Release it to resume the normal CD play from that
position.
q
w
e
Disc is dirty, or is upside down.
➡ Select the next available compact disc. Check the disc.
Disc has scratches.
➡ Select the next available compact disc. Check the disc.
No operation by some cause.
➡ Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored yet, call the shop where
you purchased the unit or the nearest Panasonic Service center to ask
for repairs.
No disc in the changer (magazine)
➡ Insert discs into the changer (magazine).
Error Display Messages
Scan Play
Tracks
• Press [3] (SCAN). The track number blinks and
the first 10 seconds of each track on the discs
play in sequence.
• To stop scanning and continue with the current
track, press [3] (SCAN) again.
Scan Play
Discs
• Press and hold [3] (SCAN) for more than 2
seconds. The first track of all the discs in the
magazine is played for 10 seconds each. Also,
Disc Number blinks at the same time.
• To stop the current play of the disc scanning,
press and hold [3] (SCAN) for more than 2
seconds again.
Repeat Play
• Press [4] (REPEAT) to repeat the current
selection. “REP” indicator lights.
• The current selection continues to repeat until
you press [4] (REPEAT) again.
Repeat Play
Disc
• Press and hold [4] (REPEAT) for more than 2
seconds to repeat the current Disc. “REP/DISC”
indicator lights.
• To cancel, press [4] (REPEAT) for more than 2
seconds again.
Repeat indicator
lights
blinks
blinks
Notes:
¡
CD changer functions are applicable to units with optional CD changer unit. (sold separately)
¡ This unit can neither play MP3 and WMA nor display CD-TEXT even if the CD changer unit support them.
CD Changer Clock display
Random Play
• Press [5] (RANDOM) to random selection of
music is played from all available CDs. “R ̈”
indicator lights.
• To cancel, press [5] (RANDOM) again.
Random indicator
Random Play
Disc
• Press and hold [5] (RANDOM) for more than 2
seconds to random selection of music is played
from the current Disc. “R
̈/DISC” indicator lights.
• To cancel, press [5] (RANDOM) for more than 2
seconds again.
lights
Playing Time
Disc Number
Track Number
lights when a CD
changer is connected.
DISC NO
DISC NO