Panasonic BM-ET500 - Manual (Page 10)

10
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q Status Indicator
Shows the status of recognition or enrollment.
ACCEPT: Lights up when recognition has been suc-
cessfully executed. *
Or lights up when enrollment has been successfully
executed through iris image capturing.
REJECT: Lights up when recognition has not been suc-
cessfully executed.
Or lights up when enrollment has not been success-
fully executed through iris image capturing.
READY: Lights up when recognition/enrollment is avail-
able.
When this indicator is blinking, recognition/enroll-
ment is unavailable.
* Depending on capturing condition, you might not enroll
your iris data even when ACCEPT is lighting. After the
enrollment, confirm through the administration PC, in
which the administration software is installed, if the
recognition has been successfully executed.
w User guidance indicators
These indicators light up when you stand in front of the
unit, and then inform you that recognition/enrollment will
start.
e Built-in color CCTV camera
This is a color camera for surveillance.
For example, it is used for status confirmation if a
recognition has not been successfully executed.
r Operation indicators
These indicators show the operation statuses of the
unit. The central indicator is lit all the time when power
is applied. Refer to p.16.
t Front panel
y 10 key cover
u LED indicator
Shows which numeric key has been pressed.
i Numeric keys
These keys are used when you execute ID-and-pass-
word authorization instead of iris recognition.
o Buzzer-level adjustment hole
Adjusts the level of buzzer, which informs you of recog-
nition/enrollment results. Refer to p.15 for details on
level adjustment.
Note: Keep away from this hole except for qualified ser-
vice personnel.
1 2 3 4 5
6 7 8 9 0
CANCEL
ENTER
t Front panel
q Status indicator
y 10 key cover
i Numeric keys
w User guidance indicators
r Operation indicators
ACCEPT
REJECT
READY
e Built-in color
CCTV camera
o Buzzer-level adjustment hole
u LED indicator