Panasonic BM-ET500 - Manual (Page 16)

16
RECOGNITION PROCEDURES
There is two ways of identification:
• Iris recognition
• ID-and-password authorization
Note: When “READY” is blinking, recognition will be
unavailable. Wait until the indicator is on, not blinking.
■ Iris Recognition
The procedures are as follows.
1. Stand in front of the unit and turn your face to the center
front panel.
Stop at the point you can see the two guidance indica-
tors simultaneously, and then turn your face to the unit.
2. The guidance indicators will automatically light up, and
iris recognition will start. Then, the buzzer will beep
briefly.
3. Status indicator q will light up.
Note: Depending on the distance between you and the
unit, status indicators will blink as shown in Figure 1
or 2. When the indicators show Figure 1 status,
come closer to the unit. When the indicators show
Figure 2 status, go farther from the unit.
4. The status indicators will light up in the order shown in
the figure.
When all indicators have lighten up, the recognition will
be finished.
5. When recognition has been successfully executed,
ACCEPT will light up and the buzzer will beep.
When recognition has not been successfully executed
(or you have not been enrolled to the unit), REJECT will
light up and the buzzer will beep.
ACCEPT
REJECT
READY
Guidance indicators
ACCEPT
REJECT
READY
Light up
ACCEPT
REJECT
READY
The indicator lights up.
q
Blinking
(Figure 1) (Figure 2)
The distance is too long.
Blinking
The distance is too short.
ACCEPT
REJECT
READY
Light up
one by
one
q
ACCEPT
REJECT
READY
ACCEPT
REJECT
READY
Lights
up