Receiving faxes, 5 receiving a fax manually (auto answer off), Receiving a fax manually (auto answer off) – Panasonic KX-FL541 User Manual

Page 41: 5 receiving a fax manually (auto answer off), 1 activating tel mode

Advertising
background image

4. Fax

39

4

Press {*}.

5

Press {A} or {B} repeatedly to display the
desired entry.

6

Press {SET}.

L

To add other entries, repeat steps 5 and 6
(up to 20 entries).

7

Press {DIRECTORY PROGRAM} to exit the
program.

4.4.3 Erasing a stored entry from
the broadcast memory

1

Press {>}.

L

Confirm that there are no documents in
the document entrance.

2

Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).

3

Press {DIRECTORY PROGRAM}.

4

Press {#}.

5

Press {A} or {B} repeatedly to display the
desired entry you want to erase.

L

To cancel erasing, press {STOP}.

6

Press {SET}.

7

Press {SET}.

L

To erase other entries, repeat steps 5 to
7.

8

Press {DIRECTORY PROGRAM} to exit the
program.

4.4.4 Sending the same
document to pre-programmed
parties

1

Insert the document FACE DOWN.

2

If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 36).

3

Press the desired {BROADCAST} (1-2) or
{

MANUAL BROAD}.

L

The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.

L

After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.

Note:

L

If you select “FINE”, “SUPER FINE”, “PHOTO”
or “PHOTO WITH TEXT” resolution, the
number of pages that the unit can transmit
will decrease.

L

If the document exceeds the memory
capacity, sending will be canceled.

L

If one of the entries is busy or does not
answer, it will be skipped and redialed later
up to 2 times.

To cancel broadcast transmission

1. Press {STOP} while the unit displays

“BROADCASTING”.

L

The display will show “SEND
CANCELED?

”.

2. Press {SET}.

Receiving Faxes

4.5 Receiving a fax
manually (AUTO ANSWER
OFF)

4.5.1 Activating TEL mode

Set the fax machine to TEL mode by pressing
{

AUTO ANSWER} repeatedly to display the

following.

TEL MODE

L

The AUTO ANSWER light is OFF.

{

FAX START}

{

STOP}

OFF

FL541.book Page 39 Thursday, December 21, 2006 9:46 AM

Advertising