Programmable features, Features summary, 1 programming – Panasonic KX-FL541 User Manual
Page 48: 2 basic features, Programming, Basic features, 1 programming, 2 basic features, 1 programming basic features, 2 programming advanced features
7. Programmable Features
46
7 Programmable Features
Features Summary
7.1 Programming
7.1.1 Programming basic
features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L
This step may be slightly different
depending on the feature.
4
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
7.1.2 Programming advanced
features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
“ADVANCE SETTINGS”.
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L
This step may be slightly different
depending on the feature.
6
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
7
To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit the program.
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
3. Press {A} or {B} repeatedly to display the
desired setting.
4. Press {SET}.
5. To exit programming, press {MENU}.
7.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 15 for details.
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 28 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 29 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 30 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR
[
±]
To print a sending report for fax transmission
results (page 37).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
{
SET}
{
MENU}
{<}{>}{A}{B}
FL541.book Page 46 Thursday, December 21, 2006 9:46 AM