Picture – Panasonic DMP-BD871 User Manual

Page 28

Advertising
background image

28

VQT3V18

This unit does not recognize the USB
connection correctly.
¾ Disconnect and reconnect the USB cable. If it

still does not recognize the connection, turn
the power of this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following :
– a USB hub
– a USB extension cable other than the

supplied with the Wireless LAN Adaptor
DY-WL5 (optional)

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The unit switches to standby mode.
¾ This unit will automatically turn to standby

mode after 30 minutes if it is inactive. (

> 16)

¾ One of the unit’s safety devices is activated

(U59 is displayed). Wait until this unit has
cooled down.

The images from this unit do not appear on
the television.
Picture is distorted.
¾ An incorrect resolution is selected in “HDMI

Resolution”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B]

and [Y] on the remote control at the same
time for more than 5 seconds.
– “00rEt” is displayed on the unit’s display.

2 Repeatedly press [

1] (right) on the remote

control or [

Í/I] on the unit until “04PrG” is

displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[

< OPEN/CLOSE] on the unit for at least

5 seconds.
Set the item again. (

> 23)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD audio are not output in
bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. (

> 26)

Video is not output in high-definition.
¾ Confirm that “HDMI Resolution” in the Setup

menu is set properly. (

> 23)

No subtitles.
¾ When progressive output is on, closed

captions/subtitles cannot be displayed.

The subtitles overlap closed captions
recorded on discs.
¾ Turn off the subtitles or the closed caption

setting on the TV. (

> 21)

A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. (

> 25)

¾ Adjust the aspect setting on the television.

Picture

DMP-BD87_77_VQT3V18_eng.book 28 ページ 2011年12月22日 木曜日 午後8時19分

Advertising
This manual is related to the following products: