Panasonic DMP-BD871 - Manual (Page 29)

29
VQT3V18
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. ( > 8, 23)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (
> 24)
Disc cannot be played.
¾ The disc is dirty. (> 4)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. ( > 9)
¾ Confirm the “BD-Live Internet Access”
settings. ( > 25)
¾ Confirm a USB device is connected to the
USB port. ( > 14)
I can’t connect to the network.
¾ Confirm the network connection and settings.
( > 9, 11, 24)
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 24), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (
> 11) again.
Audio
Playback
Network
Referen
ce
DMP-BD87_77_VQT3V18_eng.book 29 ページ ２０１１年１２月２２日 木曜日 午後８時１９分