Panasonic KX-TG1063 - Manual (Page 22)

Programming
22 For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another unit.
Programming using the direct commands
1
{
MENU} i {#}
2 Enter the desired feature code.
3
{V} /{^}: Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L
To exit the operation, press { ■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L
The operating unit column shows the unit(s) that can be used to program the item.
=
: Only the base unit can program the item.
Y : Only the handset can program the item.
= /Y: Both the base unit and handset can program the item.
L In the following table, < > indicates the default settings.
Operating
unit Feature Feature
code Setting System
setting
*1
Page
Y Alarm {
7}{2}{0} <Off>
Once
Daily – 25
Y Answer off { 3}{2}{8} – r 31
Y Answer on { 3}{2}{7} – r 31
Y Auto talk
*2
{ 2}{0}{0} On
<Off> – 14
= /Y Block w/o num.
(Block calls without
phone number) {
2}{4}{0} On
<Off> r
26
= /Y Call block { 2}{1}{7} – r 26
= /Y Caller ID edit
(Caller ID number auto
edit) { 2}{1}{4} <On>
Off – 29
= /Y Caller list { 2}{1}{3} – – 28
Y Check greeting {
3}{0}{3} – – 32
= /Y Customer support
*3
{ 6}{8}{0} – – –
Y Date and time { 1}{0}{1} – r 12
Y Deregistration { 1}{3}{1} – – 27
= Display language {
1}{1}{0} <English> – 12
Y Display
(Change language) Español
Y Erase all msg.
(msg.: messages) { 3}{2}{5} – r 33
Y Intercom { 2}{7}{4} – – 38
Y Key tone *4
{
1}{6}{5} <On>
Off – –
= /Y LCD contrast
(Display contrast) { 1}{4}{5} Level 1–6 <3> – –
TG106x(e).book Page 22 Friday, January 16, 2009 10:45 AM